[joseph67]

I need some information on the exact location of the rear antenna on a 1967 convertible. I had to put a new rear fiberglass piece and there is no predrilled hole for the antenna. Anybody got any measurements I can give to body shop? Also, the rocker panel on a 1967 that has no side pipes- what color black is the rocker panel supposed to be painted-flat black, semi-gloss, etc? Any fast help would be appreciated.

 

[jsvette]

You might want to contact National Corvette Restorers Society (NCRS) for the most accurate response to your questions.

 

[ALCHMST]

This may be the guide you need. I don't think you have to be a member to purchase. However, we would like it very much if you would join us. The annual is low and will give you access to some true C2 SMEs. Joining may be fastest way to get the details you need because membership gives you access to tech forums and contact information to people passionate about the preservation. If you do join NCRS, I would advise you then join the Facebook group for quick answers to easy questions.

1963-67 NCRS Technical Information Manual & Judging Guides - $85.00 : National Corvette Restorers Society!, Online Store

 

[joseph67]

You might want to contact National Corvette Restorers Society (NCRS) for the most accurate response to your questions.

 

[joseph67]

Thank you, I will check it out. If I just had a measurement from the back of the gap in the deck lid to the base of the antenna from someone who has a 67 that would be helpful.

 

[bob67327]

Enjoy your ’67, Joseph! We bought one new and it was our only car for over 4 years, nearly 100,000 miles. But a coupe, not a convertible.

 

[240 Gordy]

Love the iconic '67!