Stingray Corvette Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
91 Posts
Discussion Starter · #1 ·
Hi
I ordered PFADT air intake 6 weeks ago but they still don't have them in stock.

Anyone knows of an intake in stock ready to ship and it's price?


Sent from my iPhone using Corvette Stingray Forum
 

· Registered
Joined
·
1 Posts
2007 Mustang v6 cold air intake CEL?

i installed a spectra cold air intake on my car and the CEL came on i disconnected the battery and the light went off for about two days and it came right back on i took it to get coded and it said it bank 1 and 2 were to lean. what can i do to fix it
 

· Registered
Joined
·
378 Posts
2007 Mustang v6 cold air intake CEL?

i installed a spectra cold air intake on my car and the CEL came on i disconnected the battery and the light went off for about two days and it came right back on i took it to get coded and it said it bank 1 and 2 were to lean. what can i do to fix it
either a reflash, Tune, or re-install the induction system that was designed to work on the car. Like I stated before: A piece of glamorized sewer pipe with an oil soaked cloth filter element hose clamped on the end of it really an "improvement"? Engineers have spent literally thousands of hours getting the airflow through the stock induction system in exactly the way they wanted for performance, fuel economy, and longevity, did the aftermarket guys do the research to the extent that the engineers have? While you may see slight gains somewhere in the power curve, I guarantee for overall performance the stock system is far superior.
 

· Registered
Joined
·
37 Posts
take it from me also , not that the C7 system is perfection in a CAI, it is not but pretty damn good. I stuck a Haltech on my C6 and I spent the rest of my time living with "surging" the fix was a tune and all that implies. the performance gains are offset by twitches...not worth it for me.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top