Stingray Corvette Forum banner

1 - 7 of 7 Posts

·
Premium Member
Joined
·
261 Posts
Discussion Starter #1
We're happy to announced that we're now offering custom 3-pc and Monoblock forged wheels designed by Strasse Forged of Miami, FL.

We're only going to offer wheels in styles and sizes specific to the Corvette, specifically the C7 for those looking to set their car apart.

These are high end wheels and made of the finest materials and hardware. They test their products for structural integrity and safety and only offer the best to their clientele.

We had a set of Strasse SM7 3-pc Deep Concave wheels with Carbon Fiber overlay on our 2007 Z06 - so when our C7 arrived we had to go with Strasse. this time around, we went with a new SM5, Matte barrels, and custom Carbon Fiber centers. The center of the wheel features 100% real Carbon Fiber overlay on the spokes. It sets these wheels apart from the rest.

We were able to fit a 12" wide wheel in the rear with NO rubbing, NO fender rolling, and plenty of caliper clearance.

Front: 20" x 9.5"
Rear: 20" x 12"

For more info, email or PM us or check our www.StrasseForged.com

Check out pics of our wheels below... IMG_0167.JPG IMG_0151.JPG IMG_0148.JPG IMG_0168.JPG wheel 3.JPG
 

·
Senior Member
Joined
·
18,669 Posts
Excellent news! I am assuming that you will also offer StingRay wheel options to replace factory 18/19" & 19/20" wheels, for those who want to retain factory Michelin tires.
 

·
Registered
Joined
·
489 Posts
Those are really nice and clean
 

·
Premium Member
Joined
·
261 Posts
Discussion Starter #4
Excellent news! I am assuming that you will also offer StingRay wheel options to replace factory 18/19" & 19/20" wheels, for those who want to retain factory Michelin tires.
Absolutely. These are custom wheels - anything you want really just say the word.

Those are really nice and clean
Thank you
 

·
Administrator
Joined
·
16,281 Posts
Would you be willing to provide a ball park estimate of a full set using the OEM tires for both the Z51 and base model versions?
 
  • Like
Reactions: H2OStingray

·
Premium Member
Joined
·
261 Posts
Discussion Starter #7
Would you be willing to provide a ball park estimate of a full set using the OEM tires for both the Z51 and base model versions?
Sure, let me work on that figure and I will publish it here for everyone to see. What finish are you interested in and are you looking for 3-pc, or Monoblock? I assume you are referring to the SM5's pictured on our vehicle, but I wanted to be certain.

Any information on the widest you can go on these? without doing other modifications?
The widest would be a 12" wheel. That is what we're running on the rear of our C7. Any wider, and you will have interference with the wells, and suspension components.

If someone has a widebody kit, then the sky is the limit!
 
1 - 7 of 7 Posts
Top