Stingray Corvette Forum banner

1 - 4 of 4 Posts

·
Senior Member
Joined
·
18,670 Posts
Discussion Starter #1 (Edited)
Thanks to Ken Fichtner, Denny Menholt Chevrolet, were have the following GM directions on how to prepare the Z-51 StingRay for track usage.





 

·
Registered
Joined
·
873 Posts
Ken's a great dealer. Sold us our last two vettes, along with lots of parts over the last 11 years.
 

·
Registered
Joined
·
10,423 Posts
Okay, the guide says that after tracking, "return the wheel alignment settings to factory".

What are the "factory" settings/ranges for the wheel alignments (front and rear) for camber, caster, toe, and chassis thrust (zero, I assume, but want to make sure).

Thank you!
 

·
Registered
Joined
·
258 Posts
Surprised they are only using DOT 3. Not my first choice. At the very least go to MOTUL RBF 660 DOT 4 or CASTROL SRF DOT 4. Also add Speed Bleeders and SS braided lines.
 
1 - 4 of 4 Posts
Top