Stingray Corvette Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,922 Posts
Discussion Starter #1
Anyone try this?

3M showed their Paint Defender system, the key piece of which is a canned aerosol spray-on film that hardens to a protective transparent layer to protect the front of your car from bugs, stone chips, and other minor hazards. Designed for the do-it-yourselfer, the system also includes a cleaner wax, spray trigger, microfiber towel, masking tape, and a plastic sheet for masking. Available at retailers including Amazon.com, Best Buy, and others, the Paint Defender System costs about $50 and is claimed to last a year or more. It includes one can of spray, but we were told most cars will require an additional can for another $25. 3M claims the Paint Defender is safe to use on clear-coat finishes, and the film can be peeled off without damage when desired. Detailed instructions and videos are available to help with the application, and it is recommended that DIYers take their time following the directions and in properly prepping the vehicle for best results. A similar product called Custom Shield is available from Armor All.
 

·
Senior Member
Joined
·
18,669 Posts

·
Registered
Joined
·
4 Posts
I've been installing clear bra for over 13 years and just used the spray paint defender but it is no where as effective and clean looking as the 3M paint protection film. In order to do a bumper correctly without trying to get over spray every where is to take it off the bumper and then to remove all the trim pieces. I can say it's a good product to use to do the leading edge of the hood but as far as the bumper it takes too much work to do it correctly.
 

·
Registered
Joined
·
5,453 Posts
We did, it on a friends charger...it really sets up with a texture finish and does not clean well....there is no substitute for a hi quality film like XPEL...or the others....
 

·
Registered
Joined
·
489 Posts
Seems a lot like clear plasti-dip
 
1 - 6 of 6 Posts
Top