[Soho]

So looking at the Stingray order sheet the Carbon fiber ground effect package (CFZ) is $2995. It seems more and more likely stage 1 and 2 will have the same spoiler which makes stage 2 a ground effect package unless I'm missing something. Is it possible the stage 2 package is only 3k?

 

[elegant]

Yes, so far the only difference between a stage 1 and a stage 2 is the ground effects package, and thus $2,995 might be the total to take a stage 1, and adding in only the "CFZ" (black carbon fiber grounds effects components), create a stage 2.

We believe the only other stage 2 option choice to be "CFV" (visible carbon fiber ground effects) package, though clearly at a greater cost???

What do you estimate the "CFV" price to be?

 

[Soho]

Based on the roof price difference there is a 50% markup for visible carbon... so ill say $4495!

 

[elegant]

As we learned, to change a stage 1 Z06 to a state 2 only requires the carbon fiber aero package. Also we know you have a "painted carbon flash black carbon fiber" option (CFZ) @ $2,995, or a "visible carbon fiber" aero package option (CFV) @ $3,995.

Yesterday, Chief Z06 Designer Kirk Bennion confirmed that regardless of which of those two preceding options you select, the spoiler is always black. In fact, every Z06 factory spoiler, stages 1 through Z07, is always black!

Though slightly off subject, confirmed while at BGAP, that option TTV, the painting of the door mirrors, remains an option, i.e, saw a VY Z06 with its black mirrors going down the line. Z06 option TTV is the same $100.

 

[Snorman]

John,
So for the Z06, TTV does NOT include painting the rear spoiler CF nor does CFV or CFZ change it to CF or visible carbon fiber respectively?
If so, that sucks.
S.

 

[elegant]

Correct. In order to get a StingRay or a Z06 "visible carbon fiber spoiler," one will have to go aftermarket.

And you are also correct, that TTV, for a Z06, only involves painting two door mirrors carbon flash black.

 

[Janet C]

John, for EFX you can have Shark Gray instead of the standard black or the EFY Body color for the VENTS, is this correct?

Janet

 

[LT1xL82]

Is the rear spoiler for stage 1 aero similar to the Z51 spoiler or is it like the stage 2 spoiler, which is very similar to stage 3 spoiler without the clear center section?

This thread seems to imply that the rear spoilers on stage 1 and 2 are the same...which would be a change from what was previously thought.

EDIT: Having read the thread "All Z06's Have 3-Piece Spoilers!" it seems the stage 1 rear spoiler is very similar the stage 2 but a little over an inch less tall and does not have visible screws.

 

[elegant]

John, for EFX you can have Shark Gray instead of the standard black or the EFY Body color for the VENTS, is this correct? Janet

That is correct, and you can then, should you choose, also select a Shark Gray vinyl hood "stinger" decal. However, and this was clarified by Harlan yesterday, every 2015 Corvette only comes with a black front intake fascia grill and carbon flash black lower rear diffuser (even if one orders option EFX).

 

[BOBSZO6]

That is correct, and you can then, should you choose, also select a Shark Gray vinyl hood "stinger" decal. However, and this was clarified by Harlan yesterday, every 2015 Corvette only comes with a black front intake fascia grill and carbon flash black lower rear diffuser (even if one orders option EFX).

There is unfortunately no Shark Gray stinger stripe available from the factory. Only Cyber Gray.
Either aftermarket or have it painted.

If that has changed, what is the option code?

 

[elegant]

Thanks Bob for that correction; appreciate your pointing out that the hood Stinger is Cyber Gray!

I will be having my body shop painting my carbon flash Stinger hood stripe, for IMO, the factory vinyl stripe lacks some gloss next to the factory glossy paint on each side of it (as per the below Media.GM picture).

However, as we now know the exact price of the two stage 2 options, and this thread is now wandering from subject to subject, time to close it.