Stingray Corvette Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
355 Posts
Discussion Starter #1
Anyone know the approximate cost to have XPEL Ultimate professionally installed on all the critical areas of a C7?
 

·
Registered
Joined
·
1,329 Posts
Very high in California, everything is high here, corvettes do not sell at msrp, they tag an additional market adjustment to the msrp in CA. I paid $2,500 to xpel my front bumper, mirrors, full hood, partial fenders, rocker panels plus suntek window tint.
 

·
Registered
Joined
·
217 Posts
I paid $1400 for full front bumper, hood, front fenders and mirrors. And headlights.
 

·
Registered
Joined
·
755 Posts
Hello SR-71:

I was quoted $450. Cdn. for my front bumper alone. I want the Rocker Panels done as well but will wait until spring and a good polishing first as it will be sleeping for the winter. I am increasing the area covered by the factory film on the rockers. I already have a stone chip in the factory film on the passengers side rocker. This will disappear once the film is removed for the new film. That was with splash guards in place. Remember, the film will not polish so make sure your baby is polished and shiny before the film is applied.

STUNG:cool:
 

·
Registered
Joined
·
283 Posts
Expel ultimate - $700 for front bumper, partial hood/fenders, headlights, mirrors and stripe along front aftermarket splitter.

Fort Worth Texas
 

·
Registered
Joined
·
305 Posts
I've not done mine but here in Toronto Area had a quote from Sekanskin, these are the guys who did DeadMau5's Purrarri mau5car.jpg
1600 for Complete hood, front fenders, front bumper, mirrors and headlights, plus 150 for the rockers.
 

·
Registered
Joined
·
108 Posts
Expel ultimate - $700 for front bumper, partial hood/fenders, headlights, mirrors and stripe along front aftermarket splitter.

Fort Worth Texas
Do you recommend a particular installer? Thanks.
 

·
Registered
Joined
·
7,930 Posts
Anyone know the approximate cost to have XPEL Ultimate professionally installed on all the critical areas of a C7?
SR-71, When I received my C7 masterpiece new, I took it to Jon McInnis at Absolute Perfection, Goldsboro, NC to have CQuartz UK coating applied for $450.00, after a couple of weeks I took it to James Bailey at Tinted Image, Garner, NC to have the XPEL Ultimate applied to the following areas: Entire front up to the hood vent, headlights, door mirrors, door seals, and the door handle area. $810.00.

SF
Rick
 

·
Registered
Joined
·
195 Posts
I paid $2700 to get the entire car wrapped, including the headlights and top.
 

·
Registered
Joined
·
283 Posts

·
Registered
Joined
·
1,385 Posts
I went with

Auto Designs
2780 Golden Trangle BLVD View Map
Fort Worth, TX 76177
According to the Xpel website, that is the best Xpel installer in the Dallas/Fort Worth area.
 

·
Registered
Joined
·
827 Posts
It's apparently very high here in Michigan after seeing what most here has paid. I paid $695 - front bumper, $595 - rocker panels, $125 - headlights, and $50 - door cups; total = $1465. The hood and fenders would probably have cost me another $1200 - $1500.
 
1 - 14 of 14 Posts
Top